Serial 통신_ 문자열 전송

// serial 통신_ 문자열

/*
 * avr-1001.cpp
 *
 * Created: 2018-10-01 오전 9:23:35
 * Author : USER
 */ 
 
#include <avr/io.h>
#define F_CPU 16000000
#include <util/delay.h>
#include <avr/interrupt.h>
#include <stdio.h>
#include <stdlib.h>
 
#define FND_NUM0 0x3f
#define FND_NUM1 0x06
#define FND_NUM2 0x5b
#define FND_NUM3 0x4f
#define FND_NUM4 0x66
#define FND_NUM5 0x6d
#define FND_NUM6 0x7d
#define FND_NUM7 0x27
#define FND_NUM8 0x7f
#define FND_NUM9 0x6f
 
#define FND_SEL1 0x01
#define FND_SEL2 0x02
#define FND_SEL3 0x04
#define FND_SEL4 0x08
 
unsigned int fnd[10]= {FND_NUM0,FND_NUM1,FND_NUM2,FND_NUM3,FND_NUM4,FND_NUM5,FND_NUM6,FND_NUM7,FND_NUM8,FND_NUM9};
unsigned int fnd_sel[4] = {FND_SEL1,FND_SEL2,FND_SEL3,FND_SEL4};
unsigned int count=0;
unsigned int sec=0;
 
unsigned int num1Count,num2Count,num3Count,num4Count;
 
void fnd_display(int num){
    int fnd1,fnd2,fnd3,fnd4;
    fnd1 = num%10;
    fnd2 = (num/10)%10;
    fnd3 = (num/100)%10;
    fnd4 = num/1000;
    
    num1Count = fnd1;
    num2Count = fnd2;
    num3Count = fnd3;
    num4Count = fnd4;
    
    PORTC = fnd[fnd1];
    PORTG = fnd_sel[0];
    _delay_ms(1);
    PORTC = fnd[fnd2];
    PORTG = fnd_sel[1];
    _delay_ms(1);
    PORTC = fnd[fnd3];
    PORTG = fnd_sel[2];
    _delay_ms(1);
    PORTC = fnd[fnd4];
    PORTG = fnd_sel[3];
    _delay_ms(1);
    
}
ISR(TIMER0_OVF_vect){
    TCNT0 =256-5;
    count++;
    if (count >1000){
        sec++; count=0;
    }
}
 
void init_uart0(){
    UCSR0B = 0x18; // TXEN0 Transmitter Enable 
    UCSR0C = 0x06; // UCSZn Bits Settings Reserved
    
    //Baud Rate Registers
    UBRR0H = 0; 
    UBRR0L = 207;
}
void putchar0(char c){
    while(!(UCSR0A & 0x20)); // Double the USART Transmission Speed
    UDR0 = c;
}
char getchar0(){
    while(!(UCSR0A & (1<<RXC0)));
    return UDR0;
}
void putstr0(char *str){
    while(*str){putchar0(*str++);}
}
 
int main(void)
{
    /* Replace with your application code */
    
    DDRC = 0xff; // FND 출력설정
    DDRG = 0xff; // FND_SEL 출력설정
    DDRA = 0xff;
    PORTA = 0x00;
    
    init_uart0();
    
    char str1[10];
    
    TIMSK = 0x01; // R/W 선택 TIMER 0 사용
    TCCR0 = 0x04; // 분주비 64
    TCNT0 =256-5; // 0에서 시작 255가되어 256이 되면 OVF가 되어 인터럽트 구문을 실행한다.
 
    sei();
    while (1) 
    {
        fnd_display(1234);
        itoa(num4Count,str1,10);
        putstr0(str1);
        itoa(num3Count,str1,10);
        putstr0(str1);
        itoa(num2Count,str1,10);
        putstr0(str1);
        itoa(num1Count,str1,10);
        putstr0(str1);
    }
    return 0;
}